OEM products manufactured in Vietnam

Descriptions of the functions and mechanisms of car manufacturers' factory-installed products including engine related components (available for motorcycles).

    • vietnam-oem-img-vic

    Vortex creation valve (VIC)

    Function: Creating a vertical vortex with a force that is strong enough to effectively mix the mixture of fuel and air pumped through the pipe.

    Purpose:

    - Fuel saving, environmental pollution reduction.
    - Improve engine performance.

    • vietnam-oem-img-avs

    Valve system participates in CAM opening and closing process (AVS)

    Function: The lift valve system (AVS) optimizes the pulse charging process, preventing backflow of exhaust gas during the overlapping phase due to the pre-discharge pulse (at the time of opening the exhaust valve) of the cylinder. Receiving signal from CAM transmit to ECU.

    Purpose:

    Participate in CAM opening and closing process to save fuel.

    • vietnam-oem-img-o2-sensor

    Oxygen sensor (O2 sensor)

    Function: O2 sensor used to help regulate the amount of fuel in the engine therefore cleaning the exhaust.

    Purpose:

    Fuel saving, reducing environmental pollution.

    • vietnam-oem-img-at-sol

    Oil pressure control solenoid valve (AT-SOL)

    Function: The solenoid valve will control the opening and closing of oil flow to automatically adjust the number levels in the transmission.

    Purpose:

    Speed change, can change speed without interrupting motion tranmission.
    High transmission efficiency.
    Energy saving.

    • vietnam-oem-img-cvt

    Stepless-gear box control valve (CVT)

    Function: The solenoid valve will control the opening and closing of oil flow to automatically adjust the number levels in the stepless transmission.

    Purpose:

    Speed change, can change speed without interrupting motion tranmission.
    High transmission efficiency.
    Energy saving.

    • vietnam-oem-img-dct

    Dual- clutch gear box control valve (DCT)

    Function: The solenoid valve will control the opening and closing of the oil flow to automatically adjust the level (8 levels) of the dual-clutch transmission.

    Purpose:

    Speed change, can change speed without interrupting motion tranmission.
    High transmission efficiency.
    Energy saving.

    • vietnam-oem-img-egrv

    Exhaust gas recirculation valve (EGRV)

    Function: Re-circulate part of the exhaust gas into the engine.

    Purpose:

    - Reducing the generation of NOx, SOx gas in the process of burning fuel.
    - Reduce termite pollution.

    • vietnam-oem-img-ls-egr

    Exhaust gas recirculation valve (LS-EGR)

    Function: Re-circulate part of the exhaust gas into the engine.

    Purpose:

    - Reducing the generation of NOx, SOx gas in the process of burning fuel.
    - Reduce termite pollution.

    • vietnam-oem-img-ocv

    Oil flow control valve (OCV)

    Function: Re-circulate part of the exhaust gas into the engine.

    Purpose:

    - Reducing the generation of NOx, SOx gas in the process of burning fuel.
    - Reduce termite pollution.

    • vietnam-oem-img-vct-rotor

    Variable cam timing - Rotor (VCT Rotor)

    Function: Optimizel loading / discharging xupap time with the current operation condition of engine.

    Purpose:

    - Saving Fuel, increase engine power.
    - Reduce emissions.

    • vietnam-oem-img-vct-housing

    Variable cam timing - Housing (VCT Housing)

    Function: Optimizel loading / discharging xupap time with the current operation condition of engine.

    Purpose:

    - Saving Fuel, increase engine power.
    - Reduce emissions.

    • alt

    Oil flow control valve (I-VLV)

    Function: Change the oil line direction impact on intelligent variable valve assembly(I-VCT).

    Purpose:

    Adjusts open/close timing of the intake/exhaust valves of combustion chamber, optimize engine efficiency, save fuel and reduce hazardous substances in exhaust gas due to complete combustion.